| |
 |
| |
 |
 |
|
 |
Ideal for drywall (to wood or steel) applications |
 |
| |
 |
 |
|
|
Just turn the thumb screw to regulate the precise amount of countersink |
|
| |
 |
 |
|
|
Easily adjusts tool for screw sizes from 1" — 2" (25 mm — 50 mm) |
|
| |
 |
 |
|
|
Provides added comfort and reduced exertion |
|
| |
 |
 |
|
|
Feed System snaps
off for fast bit access, or to back out driven screws |
|
| |
 |
 |
|
|
Drive screws to the ceiling without
stilts or scaffolding |
|
|
|
 |
|
|
|
|
| |
Item Code: |
790003N |
|
| |
Current: |
5.4 amps |
|
| |
RPM: |
4000 rpm |
|
| |
Weight: |
4.9 lb (2.2 kg) |
|
| |
Height: |
9.25" (235 mm) |
|
| |
Length: |
18.5" (470 mm) |
|
| |
Width: |
2.75" (70 mm) |
|
| |
Fastener Capacity: |
50 screws per strip |
|
| |
Screw Lengths: |
1" — 2" (25 mm - 50 mm) |
|
| |
Screw Diameters: |
#6, #7, #8 |
|
 |
|
|
|
|
| |
Weight: |
6.9 lb (3.1 kg) |
|
| |
Height: |
9.25" (235 mm) |
|
| |
Length: |
38" (965 mm) |
|
| |
Width: |
2.75" (70 mm) |
|
| |
|
| Each tool comes complete with: |
|
|
DuraSpin screw-feed
system |
|
4000 rpm SENCO screw
gun |
|
2 spare bits |
|
Adapter that mounts
feed system to screw gun |
|
A rugged plastic carrying case |
|
|
| |
 |
|
Switch to FORWARD gear (not REVERSE).
|
|
|
| |
 |
|
Use proper hand position.
1. Pull trigger first.
2. Then push down on the screw. |
|
|
| |
 |
|
Keep tool perpendicular to the work surface.
Keep the bit squarely seated. If it begins to spin out, stop immediately.
Continuing the drive will only damage the bit.
Push down firmly during the drive. Continue to push firmly until
tool clutch disengages.
Lift tool straight up from work piece to avoid bending the bit
and inadvertent pull-out.
|
|
|
|
|
