| |
 |
| |
 |
 |
|
 |
Ideal for wood screw applications |
 |
| |
 |
 |
|
|
DS300-S2: drives 1-5/8" — 3" screws |
|
| |
 |
 |
|
|
Just turn the thumb screw to regulate the precise amount of countersink |
|
| |
 |
 |
|
|
Easily adjusts for different screw sizes |
|
| |
 |
 |
|
|
Provides added comfort and reduced exertion |
|
| |
 |
 |
|
|
Feed System snaps
off for fast bit access, or to back out driven screws |
|
| |
 |
 |
|
|
Saves knees - lets you stand while
doing flooring and decking |
|
|
| |
Drives 1-5/8" — 3" screws |
|
| |
 |
 |
| |
| |
|
 |
| |
| |
 |
 |
 |
 |
|
Cement Board |
|
Floor Sheathing |
|
|
Exterior Decks |
|
|
|
|
|
 |
|
|
|
|
| |
Item Code: |
790024N |
|
| |
Current: |
5.4 amps |
|
| |
RPM: |
2500 rpm |
|
| |
Weight: |
5.5 lb (2.5 kg) |
|
| |
Height: |
9.25" (234 mm) |
|
| |
Length: |
20.5" (520 mm) |
|
| |
Width: |
2.75" (70 mm) |
|
| |
Fastener Capacity: |
50 screws per strip |
|
| |
Screw Lengths: |
1-5/8" — 3" (41 mm - 75 mm) |
|
| |
Screw Diameters: |
#6, #8, #9, #10 |
|
 |
|
|
|
|
| |
Weight: |
7.5 lb (3.4 kg) |
|
| |
Height: |
9.25" (234 mm) |
|
| |
Length: |
40" (1,015 mm) |
|
| |
Width: |
2.75" (70 mm) |
|
| |
|
| Each tool comes complete with: |
|
|
DuraSpin screw-feed system |
|
2500 rpm SENCO screw gun |
|
2 spare bits |
|
Flooring extension |
|
Adapter that mounts feed system to screw gun |
|
A rugged plastic carrying
case
|
|
|
| |
 |
|
Switch to FORWARD gear (not REVERSE).
|
|
|
| |
 |
|
Use proper hand position.
1. Pull trigger first.
2. Then push down on the screw. |
|
|
| |
 |
|
Keep tool perpendicular to the work surface.
Keep the bit squarely seated. If it begins to spin out, stop immediately.
Continuing the drive will only damage the bit.
Push down firmly during the drive. Continue to push firmly until
tool clutch disengages.
Lift tool straight up from work piece to avoid bending the bit
and inadvertent pull-out.
|
|
|
|
|
